NationwideCoatings.com Navigation Tool Bar; Select and Click on the Link to View Your Interest

NationwideCoatings.com HOME PAGE NationwideCoatings.com NEWS PAGE NationwideCoatings.com PRODUCTS PAGE REQUEST INFORMATION FORM PAGE ORDERS and PRICING PAGE NationwideCoatings.com FORMS FREQUENTLY ASKED QUESTIONS PAGE

Miscellaneous Coatings and Specialty Products Page Banner

ALUMASHIELD Product Information Page Metallux-3.jpg (17400 bytes) SHINGLE SEALER Product Information Page
Find a Nationwide Dealer Near You Material Estimates Page Application Pictures Page NationwideCoatings.com REFERENCES PAGE Application Procedures Page Product Testing Page NationwideCoatings.com Business Opportunities Page

ELASTOMERIC ROOF COATINGS, SEALERS and CLEAR FINISHES

GO TO: ELASTOMERIC SPECIALTY COATINGS PRODUCTS PAGE
ROOF PRIMERS, CAULKING, TAPE, MATTING and SUPPLIES
MISCELLANEOUS SPECIALTY PAINTS, COATINGS & PRODUCTS Information Request Form Button
7475 ALUMASHIELD™ Aluminum Filled Acrylic Interior Radiation Control Coating. Blocks Heat Out and Keeps Heat In. Low Cost and Quick - Easy - Safe Application. Silver
Satin Click for More Details Data/MSDS
9700 AQUAMEND™ Epoxy Based Hand-Kneadable Putty that mixes in one minute for Permanent Repairs to Damp, Wet Areas and Underwater Substrates. Clear
Gloss Click for More Details Data/MSDS
5410 CRETE-MOD Acrylic Polymer Waterproofing Cement Modifier Strengthener for Trowelable Mortar, Cement, Masonry & Stucco Mixtures. CLEAR
Click Here for More Details Data/MSDS
515 PERMAGLAZE™ Acrylic Epoxy Finish, Decorative Sealer, Preservative & Non-Yellowing Penetrating Clear Gloss Finish. Clear
Gloss Click for More Details Data/MSDS
7900 PERMAUREA™ Single Component Waterbased 40% Solids POLYUREA Coating & Performance Additive for Most Surfaces. Clear
Gloss Click for More Details Data/MSDS
2595 CHALK FORCE™ Acrylic-Epoxy Chalk Sealer, High pH Sealer and Surface Conditioner for Concrete & most other Surfaces. Clear
Click Here for More Details Data/MSDS
2795 ULTRA BLOCK™ High Solids Clear Bonding Adhesive High Performance Surface Conditioner, Stain Blocker, Wood & Metal Primer Sealer. Clear
Flat Click for More Details Data/MSDS
2585 SUPER BLOCK™ Alkyd Acrylic Latex High Solids White (Tintable) Pigmented Interior and Exterior Primer and Stain Killer. White(Tintable)
Flat Click for More Details Data/MSDS

2575

SUPER BOND Superior Bonding Clear Adhesive High Performance Primer for Fiberglass, Plastic, PVC, Glass and Hard to Prime Surfaces. Clear
Flat Click for More Details Data/MSDS
2740/1 STUKKOPATCH™ Pre-Mixed, Ready-to-Use, Acrylic Waterproofing Stucco Look Textured Repair Patch, Crack Sealer & Caulk. White
SAND or ROUGH - Click for Details Data/MSDS
5450 CRETE-GRIP™ Acrylic Epoxy Ester, Primer & Troubleshooting Adhesive Bonder for Most Deck/Floor Surfaces. CLEAR
Click Here for More Details Data/MSDS
5875 ACRATHANE™ Acrylic Penetrating Concrete Stain, Sealer, Preservative & Paint. Commercial Grade WB/DB/CB
Satin Click for More Details Data/MSDS
4750 AQUAKOTE™ Acrylic Penetrating Concrete Stain, Sealer, Preservative & Paint. Industrial Grade WB/DB/CB
Satin Click for More Details Data/MSDS
5840 ULTRATHANE-40™ Industrial 100% Urethane 40% Solids Clear Sealer Finish. Excellent Durability & Chemical Resistance. CLEAR
Gloss Click for More Details Data/MSDS
9250 SKID-EX™ Anti-Skid, Anti-Slip Additive for Reducing Slip & Skid in Clears, Stains, Paints and Floor Coatings. CLEAR
Click Here for More Details Data/MSDS
407x METALUX™ ENAM Acrylic Latex Enamel Metallic-Look Finish Industrial Protective Coatings. List of Colors
S/Gloss Click for More Details Data/MSDS
5852 ULTRA GRIP™ Waterproofing Hydrostatic Pressure Resistant, Textured Concrete & Masonry Coating WHITE
Flat Click for More Details Datasheet
5850 ULTRA GRIP CLEAR™ Clear Waterproofing Hydrostatic Pressure Resistant Concrete & Masonry Coating CLEAR
Gloss Click for More Details Datasheet
5854 ULTRA GRIP PLUS™ Extra Waterproofing Hydrostatic Pressure Resistant Concrete & Masonry Coating WHITE
Flat Click for More Details Datasheet
5851 ULTRA SALTSHIELD™ Clear Waterproofing Concrete & Masonry - Salt & Efflorescence Protective Coating CLEAR
Satin Click for More Details Datasheet
5842

ULTRA GRIP DRY MIX™

White Waterproofing Powdered Masonry Coating WHITE
Flat Click for More Details Datasheet
Green Products
Nationwide's Ceramic Interior Wall, Trim & Ceiling Paints and Primers Nationwide's Ceramic Exterior Wall & Trim House Paints and Primers
ELASTOMERIC CERAMIC WALL COATINGS and CLEAR SEALERS
ELASTOMERIC SPRAY-ON TEXTURE COATINGS
ACRYLOCOAT Stucco-Look Acrylic Wall Systems
CONCRETE STAINS, PAINTS, SEALERS and CLEAR COATS

Floor, Deck and Epoxy Coatings

WOOD STAINS, SEALERS and CLEAR COATS
METAL and INDUSTRIAL COATINGS
ELASTOMERIC SPECIALTY COATINGS
MISCELLANEOUS SPECIALTY PRODUCTS
METALLIC-LOOK FINISH INDUSTRIAL PAINTS and COATINGS
TOOLS, SUNDRIES, SUPPLIES, COLORANTS, SALES, MARKETING and MISC. ITEMS
NEW & IMPROVED PRODUCTS and Research and Development

ALUMASHIELD™ INTERIOR RADIATION CONTROL COATING

ALUMASHIELD™

#7475-1 (1 Gallon)           #7475-5 (5 Gallon)           #7475-55 (55 Gallon)

Data/MSDS

Aluminum filled, water-based, low emissivity, Interior Radiation Control Coating (liquid applied thermal barrier), designed mostly for application to the underside of a building's roof, but can be applied to the interior sides of exterior walls.

SPREAD RATE: 400-500 square feet per gallon

TECH DATA:     Solids by Weight: 25%          Solids by Volume: 22%          Weight per Gallon: 8.9 lbs.

AQUAMEND™ WET-SURFACE TWO PART EPOXY REPAIR TUBES

AQUAMEND™

#9700-1 (1-4 Ounce Tube), #9700-C (Case of 12-4 Ounce Tubes)

Data/MSDS

Epoxy Based Hand-Kneadable Putty that mixes in one minute for Permanent Repairs to Damp, Wet Areas and Underwater Substrates. For Fiberglass, Metal, Wood, Concrete, Glass, Etc.

TECH DATA:  n/a

CRETE-MOD ACRYLIC POLYMER CEMENT MODIFIER

CRETE-MOD™

#5410-1 (1 Gallon)           #5410-5 (5 Gallon)           #5410-55 (55 Gallon)

Data/MSDS

Quality Low Odor Acrylic Polymer Additive Cement Modifier for Strengthening and Waterproofing most any Cementitious Mixture including Cement, Masonry, Stucco, Trowelable Mortar and Spray Crete Deck Finishes. Excellent Waterproofing Ultraviolet Resistant Binder Additive for use in Concrete and Masonry Mixtures to Reduce Cracking and Increase Strength and Durability.

ADDITION RATE: Approximately 2.5 Quarts per 50 pounds

TECH DATA:     Solids by Weight: 48%          Solids by Volume: 46%          Weight per Gallon: 8.8 lbs.

PERMAGLAZE™ CLEAR GLOSS FINISH STONE GLAZE & SEALER

PERMAGLAZE™

#515-1S (1 Gallon)           #515-C (Case of 6-1 Gallon Cans) Special Order Sizes Available

Data/MSDS

Solution Acrylic, Mineral Spirit Based, Epoxy Finish, Decorative Sealer and Preservative. Non-Yellowing Penetrating Clear Gloss Finish. Can be used on most Hard Flooring Surfaces, including Concrete, Masonry, Brick, Stone, Marble, Chattahooche and River  Rock. Not recommended for Driveways and other Vehicle Traffic areas.

SPREAD RATE: 200-300 square feet per gallon

TECH DATA:    Solids by Weight: 67%          Solids by Volume: 47%          Weight per Gallon: 11.9 lbs.

PERMAUREA™ SINGLE COMPONENT POLYUREA COATING & ADDITIVE

PERMAUREA™

#7900-1 (1 Gallon)          #7900-5 (5 Gallon)          #7900-55 (55 Gallon)

Data/MSDS

Single Component Waterbased 40% Solids POLYUREA CLEAR Coating and Performance Additive for most any surface. Can be added to most any latex product to increase performance of adhesion, waterproofing, chemical resistance and durability. Excellent Resistance to Chipping, Cracking, Peeling, Abrasion and Movement. Excellent Film Hardness with Flexibility to provide Superior Adhesion, Waterproofing and Chemical and Abrasion Resistance.

SPREAD RATE: 250-350 square feet per gallon

TECH DATA:     Solids by Weight: 40%          Solids by Volume: 39%          Weight per Gallon: 8.7 lbs.

CHALK FORCE™ EPOXY ACRYLIC CHALK & High-pH CLEAR SEALER

CHALK FORCE™ Surface Conditioner

#2595-1 (1 Gallon)           #2595-5 (5 Gallon)           #2595-55 (55 Gallon)

Data/MSDS

Quality Epoxy-Acrylic Clear Finish Chalk Sealer and High pH Surface Sealer and Conditioner. Seals Chalky Surfaces Providing a Firm Surface for Paints or Coatings. Seals High pH Cementitious Surfaces Eliminating the Waiting Period for Concrete, Cement, Mortar and Stucco to Cure.

SPREAD RATE: 300-400 square feet per gallon

TECH DATA:     Solids by Weight: 9%          Solids by Volume: 8%          Weight per Gallon: 8.9 lbs.

smallnew.gif (926 bytes)ULTRA BLOCK™ CLEAR ADHESIVE, STAIN KILLER, WOOD SEALER & METAL PRIMER

ULTRA BLOCK™

#2795-1 (1 Gallon)           #2795-5 (5 Gallon)           #2795-55 (55 Gallon)

Data/MSDS

Ultimate High Performance, High Solids Clear Acrylic Adhesive Primer, Surface Conditioner, Stain Killer and Wood Sealer. A High Solids Content Clear Primer that effectively blocks and seals most stains and bleed through including: water, lipstick, tobacco, nicotine, inks, crayons, wood knots and sap streaks. ULTRA BLOCK™ has excellent resistance to and sealing of tannin stains, plus provides rust and corrosion resistance. Excellent as a wood primer on most previously coated or uncoated wood surfaces. 

SPREAD RATE: 75-150 square feet per gallon

TECH DATA:     Solids by Weight: 48%          Solids by Volume: 42%          Weight per Gallon: 8.75 lbs.

SUPER BLOCK™ INT-EXT WHITE PRIMER, STAIN KILLER & WOOD SEALER

SUPER BLOCK™

#2585-1 (1 Gallon)           #2585-5 (5 Gallon)           #2585-55 (55 Gallon)

Data/MSDS

Superior Quality, Alkyd Acrylic High Solids White (Tintable) Pigmented Interior and Exterior Primer, Stain Killer and Wood Sealer. A High Solids Content Primer that comes standard in White, but can be tinted or matched to most Pastel, White and Tint Base Colors. Effectively blocks and seals most stains and bleed through including: water, lipstick, tobacco, nicotine, inks, crayons, wood knots and sap streaks. SUPER BLOCK™ has excellent resistance to and sealing of tannin stains. Provides a Sealed Surface for Paints or Coatings. Do not use on unprimed METAL surfaces; See METAL-PRIME RED-OX™ Primer.

SPREAD RATE: 200-300 square feet per gallon

TECH DATA:     Solids by Weight: 52%          Solids by Volume: 46%          Weight per Gallon: 10.2 lbs.

SUPER BONDINT-EXT CLEAR PRIMER, STAIN KILLER & WOOD SEALER

SUPER BOND™

#2575-1 (1 Gallon)           #2575-5 (5 Gallon)           #2575-55 (55 Gallon)

Data/MSDS

Superior Bonding Clear Acrylic Adhesive High Performance Primer. Excellent for smooth and hard to prime surfaces including: PVC, most plastics, fiberglass, glass, aluminum, galvanized and anodized metal. Excellent for use as a chalk sealer and as a bonding coat on previously coated masonry, stucco, wood and metal surfaces. SUPER BOND™ can be used as a primer on certain types of roof surfaces including: rubber roofs, EPDM and PVC roofs. This high performance multi-use latex bonding primer dries to a hard finish and can be top coated with most any paint or coating.

SPREAD RATE: 200-400 square feet per gallon

TECH DATA:     Solids by Weight: 20%          Solids by Volume: 18%          Weight per Gallon: 8.7 lbs.

STUKKOPATCH™CEMENTITOUS SURFACE REPAIR & PATCH COMPOUND

STUKKOPATCH™

#2740X-1 (1 Gal.)   #2740x-5 (5 Gal.)   #2740x-T (10.1 Oz. Tube)   #2740x-C (Case 12 Tubes)

Data/MSDS

Pre-Mixed, Ready-To-Use, Waterproofing Acrylic Stucco Finish Textured Repair Patch, Crack Sealer & Caulking Compound for Chips, Cracks, Fractures and Imperfections in Stucco, Masonry, Cement and most other Surfaces. Specify Sand(2740) or Rough(2741) Texture Finish.

SPREAD RATE: 25-50 square feet per gallon

TECH DATA:     Solids by Weight: 88%          Weight per Gallon: 12.5 lbs.

CRETE-GRIP™ ADHESIVE PRIMER & TROUBLESHOOTING DECK BONDER

CRETE-GRIP™

#5450-1 (1 Gallon)          #5450-5 (5 Gallon)          #5450-55 (55 Gallon)

Data/MSDS

CRETE-GRIP™ is a clear, non-pigmented, acrylic epoxy ester, penetrating primer for use over uncoated concrete surfaces. CRETE-GRIP™ is a low V.O.C. waterborne coating which will produce exceptional adhesion, penetration and bonding properties to porous concrete surfaces and superior adhesion and penetration to smooth troweled concrete. CRETE-GRIP™ will reduce most problems associated with concrete stains and paints when used as a primer coat. It is excellent for use as a bonding adhesive coat to remedy most defective areas of a previously coated concrete stain or paint application, when failure is down to bare concrete.

SPREAD RATE: 200-300 square feet per gallon

TECH DATA:     Solids by Weight: 20%              Solids by Volume: 18%            Weight per Gallon: 8.4 lbs.

ACRATHANE™ CONCRETE STAIN & FLOOR PAINT (COMMERCIAL GRADE)

SATIN

#5875-1 (1 Gallon)           #5875-5 (5 Gallon)           #5875-55 (55 Gallon)

Data/MSDS

COMMERCIAL GRADE - Waterbase Acrylic Penetrating Concrete Stain, Sealer, Preservative and Concrete Paint. Effectively Protects against Efflorescence, Chalking, Erosion & Cracking. For Uncoated or Previously Coated/Stained Surfaces. Excellent Adhesion with Abrasion, Chemical, U.V., and Hot Tire Pick Up Resistance. Check for compatibility on previously coated surfaces. Easy Application and Water Clean Up.
ACRATHANE™

WHITE/WHITE Base/DEEP Base/CLEAR Base      -     SPREAD RATE: 300-400 square feet per gallon

TECH DATA:     Solids by Weight: 41%          Solids by Volume: 31%          Weight per Gallon: 10.3 lbs.

AQUAKOTE™ CONCRETE STAIN & FLOOR PAINT (INDUSTRIAL GRADE)

SATIN

#4750-1 (1 Gallon)           #4750-5 (5 Gallon)           #4750-55 (55 Gallon)

Data/MSDS

INDUSTRIAL GRADE - Waterbase Acrylic Penetrating Concrete Stain, Sealer, Preservative and Concrete Paint. Effectively Protects against Efflorescence, Chalking, Erosion & Cracking. For Uncoated or Previously Coated/Stained Surfaces. Excellent Adhesion with Abrasion, Chemical, U.V., and Hot Tire Pick Up Resistance. Check for compatibility on previously coated surfaces. Easy Application and Water Clean Up.
AQUAKOTE™

WHITE/WHITE Base/DEEP Base/CLEAR Base      -     SPREAD RATE: 300-400 square feet per gallon

TECH DATA:     Solids by Weight: 44%          Solids by Volume: 33%          Weight per Gallon: 10.2 lbs.

ULTRATHANE-40™ 100% URETHANE 40% SOLIDS CLEAR GLOSS SEALER

ULTRATHANE-40™

#5840-1 (1 Gallon)          #5840-5 (5 Gallon)          #5840-55 (55 Gallon)

Data/MSDS

High Performance Industrial Grade 100% Urethane 40% Solids Clear Gloss Sealer Finish. Excellent Durability, Gloss, U.V. Resistance and Excellent Chemical Resistance. Can be used on most any Interior or Exterior Coated or uncoated Substrates. Concrete, Masonry and Cementitious Surfaces must be Previously Sealed, Primed or Coated. Excellent for use on Properly Prepared HARD WOOD Decks and Surfaces. Gas, Fuel, Oil and Chemical Containment Coating. ULTRATHANE-20™ 100% Urethane 20% Solids Commercial Grade Sealer Also Available.

SPREAD RATE: 300-350 square feet per gallon

TECH DATA:     Solids by Weight: 40%          Solids by Volume: 38%          Weight per Gallon: 8.8 lbs.

SKID-EX™ CLEAR SAND NON-SKID & NON-SLIP RESISTANCE ADDITIVE

SKID-EX™

#9250-1 (8 ounces)        #9250-5 (40 Ounces)

Data/MSDS

An Anti-Skid, Anti-Slip Additive for use in most any Latex based Clear Coat, Paint or Stain. For Reducing Slip and Skid on Slippery Coated Surfaces. This Product will help reduce slip but is NOT Guaranteed to Eliminate Slipping or Falling.

RECOMMENDED ADD LEVELS: 8 to 16 Ounces per Gallon - 40 to 80 Ounces per Five Gallons

smallnew.gif (926 bytes)METALUX™ ENAM LATEX ENAMEL METALLIC LOOK FINISHES

#4075 SILVER        #4076 BRASS        #4077 BRONZE        #4078 COPPER        #4079 GOLD

SPECIFY: MATTE(m) or SEMI-GLOSS(G)  -  Many Other Designer Metallic Finishes and Colors Available

METALUX™ ENAM Silver METALUX™ ENAM Brass

METALUX™ ENAM Bronze METALUX™ ENAM Copper

#407x-5x (5 Gallon)          #407x-55x (55 Gallon)

Data/MSDS

Quality Acrylic Latex Enamel Metallic Look Decorative Industrial Coating. Excellent Durability and Beautiful MATTE or SEMI-GLOSS Finish. Many other Decorative Metallic Look and Metal Flake Colors Available.

SPREAD RATE: 200-300 square feet per gallon

TECH DATA:     Solids by Weight: 47%           Weight per Gallon: 10.1 lbs.

SURE-LINE™ TRAFFIC MARKING and PARKING LOT STRIPING PAINT

SURE-LINE™

WHITE: #4900-1 (1 Gallon)           #4900-5 (5 Gallon)           #4900-55 (55 Gallon)
YELLOW: #4905-1 (1 Gallon)           #4905-5 (5 Gallon)           #4905-55 (55 Gallon)

Data/MSDS

Superior Quality Heavy Bodied Acrylic Traffic Marking Paint that has excellent resistance of weather, water, oil, grease, and chemicals. Fast Drying for Parking Lots, Roadways, Warehouses, Airfields, Etc. Available in White and Yellow, but inquire for additional SURE-LINE Colors.

SPREAD RATE: 125-175 square feet per gallon

TECH DATA:     Solids by Weight: 51% +/- 2%

DIAMOND DUST™ CLEAR DECORATIVE SPARKLE GLITTER CHIPS (#20)

DIAMOND DUST™

#9600-1 (1 Pound)          #9600-5 (5 Pounds)

Data/MSDS

Clear Mica Chips for adding a Sparkle and Glitter Effect to the surface of most any paint or coating. Applied to the wet surface of a freshly painted or coated horizontal or vertical surface by machine or manual application.

COVERAGE: Approximately 1 pound Diamond Dust per 500 square feet of surface area

TECH DATA:     Diamond Dust Mica #20

ULTRA GRIP™ Waterproofing Hydrostatic Coating

ULTRA GRIP™

#5852-1 (1 Gallon)        #5852-5 (5 Gallon)

Datasheet

ULTRA GRIP™ is a bright extra white, light textured finish, high-performance commercial grade 10 year, concrete & masonry waterproofing coating. Waterproofing resin modified with flexible encapsulated polymers which penetrate into the masonry for the ultimate in waterproofing protection. This new technology has excellent penetration on porous surfaces and will resist up to 10 psi of negative or positive hydrostatic pressure, which is the equivalent of a 22 foot high wall of water. It will also reduce penetration by radon gas. ULTRA GRIP™ is formulated with an environmentally friendly biocide to resist mildew growth. Conforms to ASTM D-7088 Resistance to Hydrostatic Pressure and ASTM D-6904 Resistance to Wind Driven Rain.

SPREAD RATE: 75-100 square feet per gallon

TECH DATA:     Solids by Weight: 65%         Solids by Volume: 50%       Weight per Gallon: 12.0 lbs.

ULTRA GRIP CLEAR Waterproofing Hydrostatic Coating

ULTRA GRIP CLEAR™

#5850-1 (1 Gallon)        #5850-5 (5 Gallon)

Datasheet

ULTRA GRIP™ CLEAR is a clear high-gloss, high-performance commercial grade, concrete & masonry waterproofing coating for floors and walls and decorative surfaces. Waterproofing resin modified with flexible encapsulated polymers which penetrate into the masonry for the ultimate in waterproofing protection. This new technology has excellent penetration on porous surfaces and will resist up to 4 psi of negative or positive hydrostatic pressure, which is the equivalent of an 8.8 foot high wall of water. It will also reduce penetration by radon gas. ULTRA GRIP™ CLEAR is formulated with an environmentally friendly biocide to resist mildew growth. Conforms to ASTM D-7088 Resistance to Hydrostatic Pressure and ASTM D-6904 Resistance to Wind Driven Rain.

SPREAD RATE: 75-100 square feet per gallon

TECH DATA:     Solids by Weight: 31%         Solids by Volume: 31%       Weight per Gallon: 8.5 lbs.

ULTRA GRIP PLUS Waterproofing Hydrostatic Coating

ULTRA GRIP PLUS™

#5854-1 (1 Gallon)        #5854-5 (5 Gallon)

Datasheet

ULTRA GRIP™ PLUS is a bright extra white, smooth finish, high-performance industrial grade 15 year, concrete & masonry waterproofing coating. Waterproofing resin modified with flexible encapsulated polymers which penetrate into the masonry for the ultimate in waterproofing protection. This new technology has excellent penetration on porous surfaces and will resist up to 15 psi of negative or positive hydrostatic pressure, which is the equivalent of a 33 foot high wall of water. It will also reduce penetration by radon gas. ULTRA GRIP™ PLUS is formulated with an environmentally friendly biocide to resist mildew growth. Conforms to ASTM D-7088 Resistance to Hydrostatic Pressure and ASTM D-6904 Resistance to Wind Driven Rain.

SPREAD RATE: 75-100 square feet per gallon

TECH DATA:     Solids by Weight: 65%         Solids by Volume: 57%       Weight per Gallon: 12.0 lbs.

ULTRA GRIP SALTSHIELD Salt & Efflorescence Protective Coating

ULTRA GRIP SALTSHIELD™

#5851-1 (1 Gallon)        #5851-5 (5 Gallon)

Datasheet

ULTRA GRIP™ SALTSHIELD is a Concrete Protector that provides weatherproofing and protection against deterioration caused by deicing salt, household cleaners, gasoline, oil and efflorescence (powdery, white, salt-like deposits visible on masonry). The unique SALTSHIELD technology penetrates into concrete and masonry providing excellent resistance to efflorescence staining often visible on brick, block and poured concrete surfaces. ULTRA GRIP™ SALTSHIELD seals bare masonry surfaces against dusting, staining, surface cracking and pock marking.

Protects Against Road Salt, Weathering, Gasoline and Oil - Prevents Excessive Dusting, Surface Cracking and Pockmarking - Solidifies Masonry Surfaces for Top Coat - Minimizes Reoccurring Efflorescence - Primes Prior to Paint

Note: ULTRA GRIP™ SALTSHIELD is not for use on asphalt surfaces, silicone treated surfaces, or on any masonry surface subjected to hydrostatic pressure. Surfaces subjected to hydrostatic pressure should be treated with other ULTRA GRIP™ products that resist hydrostatic pressure.

SPREAD RATE: 400 square feet per gallon

TECH DATA:     Solids by Weight: 20%         Solids by Volume: 19%       Weight per Gallon: 8.5 lbs.

ULTRA GRIP DRY MIX Waterproofing POWDERED MASONRY COATING

ULTRA GRIP DRY MIX™

#5842-5 (35 lbs.)

Datasheet

ULTRA GRIP™ DRY MIX powdered masonry coating is formulated to fill and seal porous masonry walls against water, even under pressure, by becoming an actual part of the original surface. An aggregate type material, ULTRA GRIP™ DRY MIX is ideal as a base coat, as well as a finish coat. This economical waterproofer can be used inside or outside, above or below grade. This powdered form of ULTRA GRIP™ Masonry Coating is the perfect formula for surfaces with extreme efflorescence. It mixes easily with water to make an economical white masonry waterproofing coating.

Resists 10 PSI Hydrostatic Pressure - May be Applied to Slightly Damp Surfaces - Reduces Radon Gas Penetration - For use on Cisterns and Potable Water Tanks and Systems

SPREAD RATE: 210 square feet per 35 lbs.

TECH DATA:     Solids by Weight: 100%         Solids by Volume: 100%       Weight per Gallon: 22.5 lbs.

Select the Items that Apply and Let us Know How to Contact You:

Send MISCELLANEOUS SPECIALTY COATINGS Product Information

Send ALL SPECIALTY PAINTS, COATINGS & MISCELLANEOUS Product Information

Send ALL of Nationwide's Products Information

Have a Salesperson Contact Me Via: AG00088_.gif (337 bytes)

Phone      E-Mail     US Mail

URGENT CONTACT REQUEST - Have a Salesperson Contact Me Immediately!

Contact Information: (*Signifies Required Field)

*Name

Title

Company

Address

Country

City

State

Zip

-

*Phone

Fax

*E-Mail

*

          

Home Page ButtonWhat's New ButtonProduct List ButtonRequest Information ButtonOrders and Pricing ButtonForms List ButtonFrequently Asked Questions Button

NATIONWIDE's CONTACT INFORMATION:                    Business Hours: (M-F 8am-5pm EST)

Telephone: 941.753.7500     U.S. Toll Free: 1.800.423.7264      Fax: 941.753.1773 (24 Hour Dedicated Fax)

Manufacturing Excellence Since 1964

NATIONWIDE PROTECTIVE COATING MFRS., INC.

ENERGY STAR Partner

7106 24th Court East

Sarasota, Florida  34243 U.S.A.

E-mail: info@natcoat.net             

Click for the BBB Business Review of this Manufacturers & Producers in Sarasota FL

EXCLUSIVITY: Some Nationwide Products are sold Exclusively by Dealers and/or Distributors in Select Areas and Regions.

LEAKS: Leaks resulting from acts of providence, owner or their agents, are not the responsibility of NPCMI and under no circumstances shall NPCMI be liable in any respects to the building, its occupants, its contents or for any consequential or incidental damages. Leaks are required to be repaired prior to the application of any coating and therefore are not covered under any warranty.

LABOR: Products Warranties are Limited to Material Only (see Limitations below), Labor is not included. Nationwide does not Warranty for Labor of any Kind.
LIMITATIONS: Any implied warranty, including warranty of fitness for a particular use or purpose, and warranty of merchantability, is limited in duration to the express warranty based on the Individual Product's Warranty, unless a shorter period is permitted by law. If no Warranty is stated for a specific product then the maximum warranty will be One Year from date of Purchase. If a Product has a specific Warranty and a Warranty was not applied for using a Warranty Registration Certificate, the maximum warranty will be One Year from Date of Purchase. NPCMI shall not be liable for incidental or consequential damages or for damage to the building, its contents, or its occupants. NPCMI's liability is limited to the reasonable replacement cost of product that has been fully paid for and shall be limited to defective product in the affected area only, whether any claim against it is based upon strict liability, negligence, breach of warranty or any other theory or cause of action. Venue in reference to any Product of Nationwide shall be Manatee County, Florida, U.S.A.
DISCLAIMER: Information presented on this Web Page or any other Web Page on Nationwide Protective Coating Mfrs., Inc. Web Site has been compiled by sources to be reliable, and is accurate and reliable to the best of our knowledge and belief, but is not guaranteed to be so.

Copyright ©1998-2017 NATIONWIDE PROTECTIVE COATING MFRS., INC.

www.nationwidecoating.com   -    www.nationwidecoatings.net    -   www.natcoat.net    -   www.acrylocoat.com