NationwideCoatings.com Navigation Tool Bar; Select and Click on the Link to View Your Interest

NationwideCoatings.com HOME PAGE NationwideCoatings.com NEWS PAGE NationwideCoatings.com PRODUCTS PAGE REQUEST INFORMATION FORM PAGE ORDERS and PRICING PAGE NationwideCoatings.com FORMS FREQUENTLY ASKED QUESTIONS PAGE

Floor, Deck and Epoxy Coatings Banner

ACRYLOCOAT Home Page Button Metallux-3.jpg (17400 bytes) STUKKOPATCH Pre-Mixed & Ready-To-Use Stucco and Textured Surface Repair Patch
Find a Nationwide Dealer Near You Material Estimates Page Application Pictures Page NationwideCoatings.com REFERENCES PAGE Application Procedures Page Product Testing Page NationwideCoatings.com Business Opportunities Page
This Page is Currently Under Construction; Check Back for Updates

ELASTOMERIC ROOF COATINGS, SEALERS and CLEAR FINISHES

GO TO: CONCRETE COATINGS PAGE    -     GO TO: WOOD COATINGS PAGE
ROOF PRIMERS, CAULKING, TAPE, MATTING and SUPPLIES
FLOOR, DECK & EPOXY COATINGS - Primers, Coatings & Clears Information Request Form Button
5450 CRETE-GRIP™ Acrylic Epoxy Ester, Primer & Troubleshooting Adhesive Bonder for Most Deck/Floor Surfaces. CLEAR
Click Here for More Details Data/MSDS
5460 CRETE-GUARD™ Acrylic Penetrating Concrete Stain, Sealer, Preservative & Paint. Residential Grade White/WB/DB/CB
Satin Click for More Details Data/MSDS
5495 CRETE-CLEAR™ Non-Yellowing Clear Finish. Click for More Details Data/MSDS
5875 ACRATHANE™ Acrylic Penetrating Concrete Stain, Sealer, Preservative & Paint. Commercial Grade White/WB/DB/CB
Satin Click for More Details Data/MSDS
5895 ACRACLEAR™ Non-Yellowing Clear Finish. Click for More Details Data/MSDS
4750 AQUAKOTE™ Acrylic Penetrating Concrete Stain, Sealer, Preservative & Paint. Industrial Grade White/WB/DB/CB
Satin Click for More Details Data/MSDS
4795 AQUACLEAR™ Non-Yellowing Clear Finish. Click for More Details Data/MSDS
5840 ULTRATHANE-40™ Industrial 100% Urethane 40% Solids Clear Sealer Finish. Excellent Durability & Chemical Resistance. CLEAR
Gloss Click for More Details Data/MSDS
5820 ULTRATHANE-20™ Commercial 20% Solids Urethane Click for More Details Data/MSDS
5900 ENVIROPOXY™ Two Component Waterborne Epoxy System. Excellent Durability & Chemical Resistance. White/WB/DB/CB
Gloss Click for More Details Data/MSDS
4195 TREAD KOTE™

Elastomeric Protective Walkway Rubber Tire Surfacing System for most surfaces and roofs.

White with Black
Flat Click for More Details Data/MSDS
9250 SKID-EX™ Anti-Skid, Anti-Slip Additive for Reducing Slip & Skid in Clears, Stains, Paints and Floor Coatings. CLEAR
Click Here for More Details Data/MSDS
Green Products
Nationwide's Ceramic Interior Wall, Trim & Ceiling Paints and Primers Nationwide's Ceramic Exterior Wall & Trim House Paints and Primers
ELASTOMERIC CERAMIC WALL COATINGS and CLEAR SEALERS
ELASTOMERIC SPRAY-ON TEXTURE COATINGS
ACRYLOCOAT Stucco-Look Acrylic Wall Systems
CONCRETE STAINS, PAINTS, SEALERS and CLEAR COATS

Floor, Deck and Epoxy Coatings

WOOD STAINS, SEALERS and CLEAR COATS
METAL and INDUSTRIAL COATINGS
ELASTOMERIC SPECIALTY COATINGS
MISCELLANEOUS SPECIALTY PRODUCTS
METALLIC-LOOK FINISH INDUSTRIAL PAINTS and COATINGS
TOOLS, SUNDRIES, SUPPLIES, COLORANTS, SALES, MARKETING and MISC. ITEMS
NEW & IMPROVED PRODUCTS and Research and Development

CRETE-GRIP™ ADHESIVE PRIMER & TROUBLESHOOTING DECK BONDER

CRETE-GRIP™

#5450-1 (1 Gallon)          #5450-5 (5 Gallon)          #5450-55 (55 Gallon)

Data/MSDS

CRETE-GRIP™ is a clear, non-pigmented, acrylic epoxy ester, penetrating primer for use over uncoated concrete surfaces. CRETE-GRIP™ is a low V.O.C. waterborne coating which will produce exceptional adhesion, penetration and bonding properties to porous concrete surfaces and superior adhesion and penetration to smooth troweled concrete. CRETE-GRIP™ will reduce most problems associated with concrete stains and paints when used as a primer coat. It is excellent for use as a bonding adhesive coat to remedy most defective areas of a previously coated concrete stain or paint application, when failure is down to bare concrete.

SPREAD RATE: 200-300 square feet per gallon

TECH DATA:     Solids by Weight: 20%              Solids by Volume: 18%            Weight per Gallon: 8.4 lbs.

CRETE-GUARD™ CONCRETE STAIN & FLOOR PAINT (RESIDENTIAL GRADE)

SATIN

#5460-1 (1 Gallon)           #5460-5 (5 Gallon)           #5460-55 (55 Gallon)

Data/MSDS

RESIDENTIAL GRADE - Waterbase Acrylic Penetrating Concrete Stain, Sealer, Preservative and Concrete Paint. Effectively Protects against Efflorescence, Chalking, Erosion & Cracking. For Uncoated or Previously Coated/Stained Surfaces. Excellent Adhesion with Abrasion, Chemical, U.V., and Hot Tire Pick Up Resistance. Check for compatibility on previously coated surfaces. Easy Application and Water Clean Up.

CRETE GUARD™

WHITE/WHITE Base/DEEP Base/CLEAR Base      -     SPREAD RATE: 300-400 square feet per gallon

TECH DATA:     Solids by Weight: 40%          Solids by Volume: 30%          Weight per Gallon: 10.2 lbs.

CRETE-CLEAR™ ACRYLIC PROTECTIVE CLEAR SEALER (RESIDENTIAL GRADE)

CLEAR

#5495-1 (1 Gallon)           #5495-5 (5 Gallon)           #5495-55 (55 Gallon)

Data/MSDS

RESIDENTIAL GRADE - Waterbase Acrylic Clear Penetrating Concrete Sealer, Preservative and Concrete Paint Sealer. Non-Yellowing Clear Sealer that effectively Protects against Efflorescence, Chalking, Erosion & Cracking. For Uncoated or Previously Coated/Stained Surfaces. Excellent Adhesion with Abrasion, Chemical, U.V., and Hot Tire Pick Up Resistance. Check for compatibility on previously coated surfaces. Easy Application and Water Clean Up.

CRETE CLEAR™

CLEAR FINISH     -      SPREAD RATE: 300-400 square feet per gallon

TECH DATA:     Solids by Weight: 28%          Solids by Volume: 27%          Weight per Gallon: 8.6 lbs.

ACRATHANE™ CONCRETE STAIN & FLOOR PAINT (COMMERCIAL GRADE)

SATIN

#5875-1 (1 Gallon)           #5875-5 (5 Gallon)           #5875-55 (55 Gallon)

Data/MSDS

COMMERCIAL GRADE - Waterbase Acrylic Penetrating Concrete Stain, Sealer, Preservative and Concrete Paint. Effectively Protects against Efflorescence, Chalking, Erosion & Cracking. For Uncoated or Previously Coated/Stained Surfaces. Excellent Adhesion with Abrasion, Chemical, U.V., and Hot Tire Pick Up Resistance. Check for compatibility on previously coated surfaces. Easy Application and Water Clean Up.

ACRATHANE™

WHITE/WHITE Base/DEEP Base/CLEAR Base      -     SPREAD RATE: 300-400 square feet per gallon

TECH DATA:     Solids by Weight: 41%          Solids by Volume: 31%          Weight per Gallon: 10.3 lbs.

ACRACLEAR™ ACRYLIC PROTECTIVE CLEAR SEALER (COMMERCIAL GRADE)

CLEAR

#5895-1 (1 Gallon)           #5895-5 (5 Gallon)           #5895-55 (55 Gallon)

Data/MSDS

COMMERCIAL GRADE - Waterbase Acrylic Clear Penetrating Concrete Sealer, Preservative and Concrete Paint Sealer. Non-Yellowing Clear Sealer that effectively Protects against Efflorescence, Chalking, Erosion & Cracking. For Uncoated or Previously Coated/Stained Surfaces. Excellent Adhesion with Abrasion, Chemical, U.V., and Hot Tire Pick Up Resistance. Check for compatibility on previously coated surfaces. Easy Application and Water Clean Up.

ACRACLEAR™

CLEAR FINISH     -      SPREAD RATE: 300-400 square feet per gallon

TECH DATA:     Solids by Weight: 29%          Solids by Volume: 28%          Weight per Gallon: 8.6 lbs.

AQUAKOTE™ CONCRETE STAIN & FLOOR PAINT (INDUSTRIAL GRADE)

SATIN

#4750-1 (1 Gallon)           #4750-5 (5 Gallon)           #4750-55 (55 Gallon)

Data/MSDS

INDUSTRIAL GRADE - Waterbase Acrylic Penetrating Concrete Stain, Sealer, Preservative and Concrete Paint. Effectively Protects against Efflorescence, Chalking, Erosion & Cracking. For Uncoated or Previously Coated/Stained Surfaces. Excellent Adhesion with Abrasion, Chemical, U.V., and Hot Tire Pick Up Resistance. Check for compatibility on previously coated surfaces. Easy Application and Water Clean Up.

AQUAKOTE™

WHITE/WHITE Base/DEEP Base/CLEAR Base      -     SPREAD RATE: 300-400 square feet per gallon

TECH DATA:     Solids by Weight: 44%          Solids by Volume: 33%          Weight per Gallon: 10.2 lbs.

AQUACLEAR™ ACRYLIC PROTECTIVE CLEAR SEALER (INDUSTRIAL GRADE)

CLEAR

#4795-1 (1 Gallon)           #4795-5 (5 Gallon)           #4795-55 (55 Gallon)

Data/MSDS

INDUSTRIAL GRADE - Waterbase Acrylic Clear Penetrating Concrete Sealer, Preservative and Concrete Paint Sealer. Non-Yellowing Clear Sealer that effectively Protects against Efflorescence, Chalking, Erosion & Cracking. For Uncoated or Previously Coated/Stained Surfaces. Excellent Adhesion with Abrasion, Chemical, U.V., and Hot Tire Pick Up Resistance. Check for compatibility on previously coated surfaces. Easy Application and Water Clean Up.

AQUACLEAR™

CLEAR FINISH     -      SPREAD RATE: 300-400 square feet per gallon

TECH DATA:     Solids by Weight: 30%          Solids by Volume: 28%          Weight per Gallon: 8.7 lbs.

ULTRATHANE-40™ 100% URETHANE 40% SOLIDS CLEAR GLOSS SEALER

ULTRATHANE-40™

#5840-1 (1 Gallon)          #5840-5 (5 Gallon)          #5840-55 (55 Gallon)

Data/MSDS

High Performance Industrial Grade 100% Urethane 40% Solids Clear Gloss Sealer Finish. Excellent Durability, Gloss, U.V. Resistance and Excellent Chemical Resistance. Can be used on most any Interior or Exterior Coated or uncoated Substrates. Concrete, Masonry and Cementitious Surfaces must be Previously Sealed, Primed or Coated. Excellent for use on Properly Prepared HARD WOOD Decks and Surfaces. Gas, Fuel, Oil and Chemical Containment Coating.

SPREAD RATE: 300-350 square feet per gallon

TECH DATA:     Solids by Weight: 40%          Solids by Volume: 38%          Weight per Gallon: 8.8 lbs.

ULTRATHANE-20™ 100% URETHANE 20% SOLIDS CLEAR GLOSS SEALER

ULTRATHANE-20™

#5820-1 (1 Gallon)          #5820-5 (5 Gallon)          #5820-55 (55 Gallon)

Data/MSDS

High Performance Commercial Grade 100% Urethane 20% Solids Clear Gloss Sealer Finish. Excellent Durability, Gloss, U.V. Resistance and Chemical Resistance. Can be used on most any Interior or Exterior Coated or uncoated Substrates. Concrete, Masonry and Cementitious Surfaces must be Previously Sealed, Primed or Coated. Great for use on Properly Prepared HARD WOOD Decks and Surfaces.

SPREAD RATE: 300-350 square feet per gallon

TECH DATA:     Solids by Weight: 20%          Solids by Volume: 19%          Weight per Gallon: 8.5 lbs.

smallnew.gif (926 bytes)ENVIROPOXY™ TWO COMPONENT WATERBORNE EPOXY SYSTEM

ENVIROPOXY™

#5900-1 (1 Gallon System)          #5900-5 (4 Gallon System)

Data/MSDS

Two-Component, hard finish, low V.O.C., environmentally safe, waterborne epoxy. It is easy to apply, has low odor and high hiding characteristics. This product is tintable with waterbased colorants, and is available in Tint, Deep & Clear bases and a non-pigmented clear gloss finish.

SPREAD RATE: 200-300 square feet per gallon

TECH DATA:     Solids by Weight: 50%          Solids by Volume: 40%          Weight per Gallon: 10.1 lbs.

smallnew.gif (926 bytes)TREAD KOTE™ PROTECTIVE WALKWAY SURFACING SYSTEM

TREAD KOTE™

#4195-1 (1 Gallon)          #4195-5 (5 Gallon)          #4195-55 (55 Gallon)

Data/MSDS

Impervious Cushioned Flooring System, designed for a wide variety of Commercial and Industrial Applications.  This system is tintable allowing you to create a wide range of coordinated appearances and attractive finish look. Cold, wet poured into a one piece monolithic surface, it is an extremely durable yet flexible flooring and walkway solution. TREAD KOTE™ is made with crumb rubber (from recycled tires) and a special elastomeric bonding agent. It complies fully with the Nationwide Protective Coating Manufacturers, Inc. standards for Green Product Technology. TREAD KOTE™ provides excellent traction for added safety. The cushioned surface also makes for more comfortable walking with less wear on legs. It is an easy to clean surface that requires minimal maintenance promoting a hygienic environment.

SPREAD RATE: 10-25 square feet per gallon

TECH DATA:     Solids by Weight: 75%          Solids by Volume: 70%          Weight per Gallon: 11.9 lbs.

SKID-EX™ CLEAR SAND NON-SKID & NON-SLIP RESISTANCE ADDITIVE

SKID-EX™

#9250-1 (8 ounces)        #9250-5 (40 Ounces)

Data/MSDS

An Anti-Skid, Anti-Slip Additive for use in most any Latex based Clear Coat, Paint or Stain. For Reducing Slip and Skid on Slippery Coated Surfaces. This Product will help reduce slip but is NOT Guaranteed to Eliminate Slipping or Falling.

RECOMMENDED ADD LEVELS: 8 to 16 Ounces per Gallon - 40 to 80 Ounces per Five Gallons

Select the Items that Apply and Let us Know How to Contact You:

Send Floor, Deck & Epoxy Coatings Information

Send All of Nationwide's Products Information

Have a Salesperson Contact Me Via: AG00088_.gif (337 bytes)

Phone      E-Mail     US Mail

URGENT CONTACT REQUEST - Have a Salesperson Contact Me Immediately!

Contact Information: (*Signifies Required Field)

*Name

Title

Company

Address

Country

City

State

Zip

-

*Phone

Fax

*E-Mail

*

          

Home Page ButtonWhat's New ButtonProduct List ButtonRequest Information ButtonOrders and Pricing ButtonForms List ButtonFrequently Asked Questions Button

NATIONWIDE's CONTACT INFORMATION:                    Business Hours: (M-F 8am-5pm EST)

Telephone: 941.753.7500     U.S. Toll Free: 1.800.423.7264      Fax: 941.753.1773 (24 Hour Dedicated Fax)

Manufacturing Excellence Since 1964

NATIONWIDE PROTECTIVE COATING MFRS., INC.

ENERGY STAR Partner

7106 24th Court East

Sarasota, Florida  34243 U.S.A.

E-mail: info@natcoat.net             

Click for the BBB Business Review of this Manufacturers & Producers in Sarasota FL

EXCLUSIVITY: Some Nationwide Products are sold Exclusively by Dealers and/or Distributors in Select Areas and Regions.

LEAKS: Leaks resulting from acts of providence, owner or their agents, are not the responsibility of NPCMI and under no circumstances shall NPCMI be liable in any respects to the building, its occupants, its contents or for any consequential or incidental damages. Leaks are required to be repaired prior to the application of any coating and therefore are not covered under any warranty.

LABOR: Products Warranties are Limited to Material Only (see Limitations below), Labor is not included. Nationwide does not Warranty for Labor of any Kind.
LIMITATIONS: Any implied warranty, including warranty of fitness for a particular use or purpose, and warranty of merchantability, is limited in duration to the express warranty based on the Individual Product's Warranty, unless a shorter period is permitted by law. If no Warranty is stated for a specific product then the maximum warranty will be One Year from date of Purchase. If a Product has a specific Warranty and a Warranty was not applied for using a Warranty Registration Certificate, the maximum warranty will be One Year from Date of Purchase. NPCMI shall not be liable for incidental or consequential damages or for damage to the building, its contents, or its occupants. NPCMI's liability is limited to the reasonable replacement cost of product that has been fully paid for and shall be limited to defective product in the affected area only, whether any claim against it is based upon strict liability, negligence, breach of warranty or any other theory or cause of action. Venue in reference to any Product of Nationwide shall be Manatee County, Florida, U.S.A.
DISCLAIMER: Information presented on this Web Page or any other Web Page on Nationwide Protective Coating Mfrs., Inc. Web Site has been compiled by sources to be reliable, and is accurate and reliable to the best of our knowledge and belief, but is not guaranteed to be so.

Copyright ©1998-2017 NATIONWIDE PROTECTIVE COATING MFRS., INC.

www.nationwidecoating.com   -    www.nationwidecoatings.net    -   www.natcoat.net    -   www.acrylocoat.com