INFORMATION
REQUEST FORM at Bottom of this Page
---->
This Site Last Updated:
Sunday, November 09, 2008 10:43 PM
ACRYLOCOAT™ is an AMAZING PRODUCT
relatively new to the Coatings Industry. It is a Ready-To-Use, TROWEL or SPRAY Applied,
Exterior or Interior Decorative Wall Coating that looks and feels like Cement Stucco
Finishes. ACRYLOCOAT™ Systems have been developed to replace and/or remedy
problematic cementitious finishes currently being used. ACRYLOCOAT™ is an ACRYLIC
Waterproofing Formulation that features Elastomeric Qualities that reduce and/or eliminate
the Cracking and Spalling typically associated with Cement Stucco Finishes.
ACRYLOCOAT™ is NOT an Exterior Insulated Finish
System (EIFS)!
ACRYLOCOAT™ is a
Ready-To-Use, Pre-Mixed Product that can be "Direct Applied" to numerous
different substrates to provide a Beautiful Decorative Waterproofing Finish such as:
SMOOTH, SAND, PULL, KNOCKDOWN, SWIRL or WORM Pattern. Many
other types of designs and finishes can be achieved through various application methods.
ACRYLOCOAT™ can be used
on Plywood, Clapboard, Weathered Wood, T111 Siding, Structural Insulated Panels (SIPs),
Oriented Strand Board(O.S.B.), Insulated Concrete Forms (ICFs), Primed Metal, Galvanized
Metal, Copper, Aluminum, Tin, Styrofoam, Polystyrene, Fiberglass, Clay, Adobe, Stucco,
Concrete, Concrete Block, Exterior Gypsum Board, Dens-Glass and Various Other Substrates.
ACRYLOCOAT™ has a 12
Year Manufacturer's Limited Material Warranty, when properly applied, against chipping,
cracking and peeling from the surface to which it is applied.
Project design professionals are responsible for
ensuring that our products are suitable for the proposed project. For assistance in
preparing your specification, contact your ACRYLOCOAT™ Dealer or Nationwide Chemical
Coating Manufacturers, Inc.
EXCLUSIVITY: Some
Nationwide Products are sold Exclusively by Dealers and/or
Distributors in Select Areas and Regions.
LEAKS:Leaks
resulting from acts of providence, owner or their agents,
are not the responsibility of NCCMI and under no
circumstances shall NCCMI be liable in any respects to the
building, it’s occupants, it’s contents or for any
consequential or incidental damages. Leaks are required to
be repaired prior to the application of any coating and
therefore are not covered under any warranty.
LABOR:Products
Warranties are Limited to Material Only (see Limitations
below), Labor is not included. Nationwide does not Warranty
for Labor of any Kind.
LIMITATIONS:
Any implied warranty, including warranty of fitness for a
particular use or purpose, and warranty of merchantability,
is limited in duration to the express warranty based on the
Individual Product's Warranty, unless a shorter period is
permitted by law. If no Warranty is stated for a specific
product then the maximum warranty will be One Year from date
of Purchase. If a Product has a specific Warranty and a
Warranty was not applied for using a Warranty Registration
Certificate, the maximum warranty will be One Year from Date
of Purchase. NCCMI shall not be liable for incidental or
consequential damages or for damage to the building, it’s
contents,
or it’s occupants. NCCMI's liability is limited to the
reasonable replacement cost of product that has been fully
paid for and shall be limited to defective product in the
affected area
only, whether any claim against
it is based upon strict liability, negligence, breach of
warranty or any other theory or cause of action. Venue in
reference to any Product of Nationwide shall be Manatee
County, Florida, U.S.A.
DISCLAIMER:
Information presented on this Web Page or any other Web Page
on Nationwide Chemical Coating Mfrs., Inc. Web Site has been
compiled by sources to be reliable, and is accurate and
reliable to the best of our knowledge and belief, but is not
guaranteed to be so.
